INTRODUCING | A revolutionary 1200V 15A fully integrated half-bridge high-side switch

INTRODUCING
A revolutionary 1200V 15A fully integrated half-bridge high-side switch

INTRODUCING

A revolutionary 1200V 15A fully integrated half‑bridge high‑side switch

18SCT005

1200V Voltage Monitor

The 18SCT005 is a very accurate (+/-0.75%) voltage divider typically used to sense system voltage from +/-150V to +/-1200V. The nominal gain of 3125ppm is extremely constant with temperature and voltage varying by about 8ppm from -40 to 85C at 800V.

For systems using a voltage pump, the 18SCT005 has a built-in 1kHz low-pass filter eliminates noise from the effect of voltage pumping frequencies thus allowing accurate voltage measurements for portable systems using charge pumps.

The very small footprint of the TSSOP8 (4.4mm) makes this IC ideal for compact application where saving space is important but its linearity and constant
performance across temperature and voltage makes this the ideal choice for HV electronics in general.

Features

Low Cost
3125ppm Divider Ratio (2.500V at 800V)
0.75% Accuracy (23ppm)
+/-2ppm Temperature Stability
+/-2ppm Gain Linearity over voltage
Voltage Sensing up to +/-1200V
Very small TSSOP8 4.4mm package (1400V rating)
Rail-to-Rail output
1kHz Low-Pass HV Filtering
Voltage Buffer with <|2mV| Offset Voltage

Applications

Automotive EV Powertrain and Inverters
Cardiac Defibrillators
Industrial High Voltage Sensing

Block diagram

Applications

Typical DC application

Typical AC application

Available at:

contact us to discuss how we can customize this product to meet your specific needs.

related products

15SCT000

2-channel Rad-Hard Residual Current Device

Dual-channel control circuit intended for application in a Residual Current Circuit Breaker (RCBO) or Residual Current Device (RCD).

16SCT001

1200V Direct-Coupled FET IGBT Gate Driver

For systems requiring the ability to control the conduction state of a high-voltage MOSFET / IGBT switch

16SCT100

1200V High Side Switch

1200V 15A fully integrated half-bridge high-side switch typically used in systems requiring H-bridges

16SCT000

Transformer-Coupled FET/IGBT Gate Driver

Control of the conduction state of a high-side switch from the secondary of a small high voltage isolation transformer.

10SCT

Transient surge suppressors

These low cost SCR-based TVS are ultra fast with a typical clamping speed of 20nSec.

17SCT002

Direct-coupled high-voltage (1kV) current limiter

The 17SCT004A can very efficiently discharge high-voltage capacitors when needed while protecting itself and surrounding circuitry.